Prof. Juin-Yih Lai, Founder

Prof. Kueir-Rarn Lee

Prof. Chung-Jung Chuang

Prof. Yung Chang  

Prof. Tsair-Wang Chung

Prof. Jung-Hui Chen

Prof. Shia-Chung Cheng
Prof. Sheng-Jie You

Prof. Chien-Chieh Hu

Prof. Meng-Hui Li

Prof. Chia-Her Lin

Prof. Yi-Feng Lin

Prof. Hui-An Tsai

Assoc.Prof.Ta-Chin Wei

Assoc.Prof.Antoine Venault

Assoc.Prof.Wei-Song Hung

Prof. Da-Ming Wang

Prof. Duu-Jong Lee

Prof. Kuo-Lun Tung
Prof. Ying-Ling Liu

Chair Prof. Akon Higuchi

Prof. Yi-Ming Sun
Prof. Shing-Jiang Lue
Prof. Shu-Hsien Huang
Dr. Feng-Ming Ho

:: Home

::
Chung Yuan Univ.

:: Chemical Engineering

 
 
      Home >  Key PersonnelAssoc. Prof. Ta-Chin Wei
....
   
 
 

  

Assoc. Prof. Ta-Chin Wei  


Ph.D., Chem. Eng., Penn State University 
E-mail
tcwei@cycu.edu.tw


Professional Specialty
:
Thin Films
Plasma Processing

Electronic Materials

Plasma Diagnostics

Plasma Modeling

 

Research Fields:
Surface Modification of Membrane

Develop plasma reactor for roll-to-roll processing of polymeric membranes to enhance the surface wettability, adhesion, gas separation and biocompatibility.


Plasma Deposition

Deposit superhydrophobic material or barrier layer via PVD or PECVD technique.

 

Atmospheric-Pressure Glow Discharge (APGD)

Develop APGD process for etching, deposition, and surface modification, especially, the APGD-induced Grafting process. 

 

Plasma Modeling and Diagnostics

Elucidate plasma processes via computer simulations and characterization tools such as Langmuir probe, OES and Mass Spectroscopy.

 

Plasma Processes in Air Pollution Control

Abatement of PFCs, conversion of methane.


Potential Applications of Research
:

Plasma Modification Membranes for Gas Separation or Biomedical Applications 

Plasma Deposition of Organic or Inorganic Films for Electronic Industry 

Development of Plasma Reactor Used for Large Area Processing 

Development of Plasma Processes for Pollution Control  



Selected Publications:

S.J. Lue, J.J. Hsu, T.C. Wei, “Drug permeation modeling through the thermo-sensitive membranes of poly(N-isopropylacrylamide) brushes grafted onto micro-porous films.” J. Membr. Sci., 321, 146-154 (2008).
K.S. Chen, T. C. Wei, M.S. Li, H.M. Wu, T.P. Tang, C.Y. Wang, Y.C. Tu, “Chemical characterization of plasma-polymerized films form acetylene and nitrogen-containing mixtures and their ethanol vapor sensitivity,” Radiation Physics and Chemistry, 76, 941-950 (2007).
C.H. Liu, T. C. Wei, “The effect of monomer inlet position on the fluorocarbon film deposited by RF plasma,” J. Chin. Inst. Chem. Engr. 37, 169-176 (2006).
T. C. Wei, C.H. Liu, “Evaluation of plasma deposited fluorocarbon films using experimental design methodology,” Surf. Coat. Technol. 200, 2214-2222 (2005).
W.B. Tsai, T.C. Wei, M.C. Lin, J.Y. Wang, C.H. Chen, “The effect of radio frequency glow discharge treatment of polystyrene on the behavior of porcine chondrocytes in vitro,” J. Biomater. Sci. Polymer Edn. 16, 699-714 (2005).
  Tel+886-3-265-4190

Fax+886-3-265-4198

Emailmembrane@cycu.edu.tw

Address

No.493, Xinzhong N. Rd., 

Zhongli Dist., Taoyuan City 320,

Taiwan (R.O.C.)