Cluster Analysis for Polychlorinated Dibenzo-p-Dioxins and Dibenzofurans Concentrations in Southern Taiwan

2009.12 Journal of the Air & Waste Management Association, 59(12), 1474-1480 (2009)

Molar heat capacity and electrolytic conductivity of aqueous solutions of [Bmim][MeSO₄] and [Bmim][triflate]

2009.12 Thermochimica Acta,  496(1-2), 105-109 (2009)

Effect of cavity surface coating on mold temperature variation and the quality of injection molded parts

2009.12 International Communications in Heat and Mass Transfer, 36(10) 1030-1035, (2009)

Aerobic granulation in sequencing batch reactors at different settling times

2009.11 Bioresource Technology, 100(21), 5359-5361 (2009)

Synthesis and Electroluminescent Properties of Polyfluorene-Based Conjugated Polymers Containing Bipolar Groups

2009.11 Journal of Polymer Science Part A: Polymer Chemistry, 47(22), 6231-6245 (2009)

Polyimides membranes for pervaporation and biofuels separation

2009.11 Progress in Polymer Science, 34(11), 1135-1160 (2009)

New amphiphilic fluorescent CBABC-type pentablock copolymers containing pyrene group by two-step atom transfer radical polymerization (ATRP) and its self-assembled aggregation

2009.10 Polymer, 50(22), 5211-5219 (2009)

Feasibility evaluation of gas-assisted heating for mold surface temperature control during injection molding process

2009.10 International Communications in Heat and Mass Transfer, 36(8), 806-812 (2009)

Filamentous bacteria in a foaming membrane bioreactor

2009.10 Journal of Membrane Science, 342(1-2), 42-49 (2009)

Equilibrium Isotherms of Volatile Alkanes, Alkenes, and Ketones on Activated Carbon

2009.08 Journal of Chemical & Engineering Data, 54(8), 2208-2215 (2009)

Separation of Hematopoietic Stem and Progenitor Cells from Human Peripheral Blood Through Polyurethane Foaming Membranes Modified with Several Amino Acids

2009.10 Journal of Applied Polymer Science, 114(2), 671-679 (2009)

Modulating the Activities of Human Mesenchymal Stem Cells (hMSCs) and C3A/HepG2 Hepatoma Cells by Modifying the Surface Characteristics of Poly(3-hydroxybutyrate-co-3-hydroxyhexnoate) (PHBHHx)

2009.09 Journal of Biomaterials Science-Polymer Edition, 20(9), 1275-1293 (2009)

Development of MBPLS based control for serial operation processes

2009.07 Korean Journal of Chemical Engineering, 26(4), 935-945 (2009)

Functionalization of silica nanoparticles with 4-isocyanato-4'-(3,3'-dimethyl-2,4-dioxo-azetidino)diphenyl methane, surface chemical reactivity and nanohybrid preparation

2009.08 Journal of Colloid and Interface Science, 336(1), 189-194 (2009)

PTFE/polyamide thin-film composite membranes using PTFE films modified with ethylene diamine polymer and interfacial polymerization: Preparation and pervaporation application

2009.08 Journal of Colloid and Interface Science, 336(1), 260-267 (2009)

Polyhedral oligomeric silsesquioxane nanocomposites exhibiting ultra-low dielectric constants through POSS orientation into lamellar structures

2009.06 Journal of Materials Chemistry, 19(22), 3643-3647 (2009)

A novel, conjugated polymer containing fluorene, pyridine and unsymmetric carbazole moieties: Synthesis, protonation and electrochemical properties

2009.08 Dyes and Pigments, 82(2), 109-117 (2009)

The facile synthesis and optical nonlinearity of hyperbranched polyaspartimides with azobenzene dyes

2009.07 Dyes and Pigments, 82(1), 31-39 (2009)  

Effect of heavy metals on nitrification performance in different activated sludge processes

2009.06 Journal of Hazardous Materials, 165(1-3), 987-994 (2009)

Vapour pressures, densities, and viscosities of the aqueous solutions containing (triethylene glycol or propylene glycol) and (LiCl or LiBr)

2009.05 The Journal of Chemical Thermodynamics, 41(5), 623-631 (2009)

High-rate denitrifying sulfide removal process in expanded granular sludge bed reactor

2009.04 Bioresource Technology, 100(7), 2316-2319 (2009)

Preparation and properties of chitosan/carbon nanotube nanocomposites using poly(styrene sulfonic acid)-modified CNTs

2009.03 Carbohydrate Polymers, 76(2), 232-238, (2009)

Preparation of fractioned DNA aptamer-Pt complex through ultrafiltration and the colorimetric sensing of thrombin

2009.02 Journal of Membrane Science, 328(1-2), 97-103 (2009)

PLS data-driven based approach to design of a simulated moving bed process

2009.02 Separation and Purification Technology, 65(2), 173-183 (2009)

Investigation of the Effects of Injection Molding Processing Parameters on Conductive Polymeric Composites for Electromagnetic Interference Shielding Effectiveness

2009.02 Polymer-Plastics Technology and Engineering, 48(2), 216-220 (2009)

Polymeric spheres on substrates from a spin-coating process

2009.02 Journal of Colloid and Interface Science, 330(1), 73-76, (2009)

2009.02 Fluid Phase Equilibria,  276(1), 69-74 (2009)

Proteolytic activity in stored aerobic granular sludge and structural integrity

2009.01 Bioresource Technology, 100(1), 68-73 (2009)

Heat capacities and electrical conductivities of 1-n-butyl-3-methylimidazolium-based ionic liquids

2009.01 Thermochimica Acta, 482(1-2), 42-48 (2009)

Fouling layer on hollow-fibre membrane in aerobic granule membrane bioreactor

2008.11 Journal of the Chinese Institute of Chemical Engineers, 39(6), 657-661 (2008)

Influences for the Addition of Ethanol to the Absorption System on the Interfacial Disturbances and Mass Transfer Performance

2008.10 Industrial & Engineering Chemistry Research, 47(19), 7397-7404 (2008)

Diffusion coefficients and molar conductivities in aqueous solutions of 1-ethyl-3-methylimidazolium-based ionic liquids

2008.10 Fluid Phase Equilibria, 271(1-2), 43-52 (2008)

Polymeric membrane studied using slow positron beam

2008.10 Applied Surface Science, 255(1), 201-204 (2008)

Study on the thermoforming of PC films used for in-mold decoration

2008.10 International Communications in Heat and Mass Transfer,  35(8), 967-973 (2008)

Interfacial polymerized thin-film composite membranes for pervaporation separation of aqueous isopropanol solution

2008.09 Separation and Purification Technology, 62(3), 694-701 (2008)

Effects of residual solvent on gas separation properties of polyimide membranes

2008.08 Separation And Purification Technology, 62(1), 175-182 (2008)

Electrostatic immobilization of DNA polyplexes on small intestinal submucosa for tissue substrate-mediated transfection

2008.07 Acta Biomaterialia, 4(4), 799-807 (2008)

The Effect of Curvature of a Spacer-filled Channel Fluid Flow in Spiral-Wound Membrane Modules

2008.07 Journal of Membrane Science, 319(1-2), 286-297 (2008)

Modeling and optimization of hollow fiber DCMD module for desalination

2008.06 Journal of Membrane Science, 318(1-2), 154-166 (2008)

Calculation of effective pore diameters in porous filtration membranes with image analysis

2008.06 Robotics and Computer-integrated Manufacturing, 24(3), 427-434 (2008)

Formation and evolution of a bicontinuous structure of PMMA membrane during wet immersion process

2008.05 Journal of Membrane Science, 315(1-2), 106-115 (2008)

A top surface liquid layer during membrane formation using Vapor-Induced Phase Separation (VIPS) - Evidence and mechanism of formation

2008.03 Journal of Membrane Science, 310(1-2), 278-288 (2008)

The Effects of Surface Modifications on Preparation and Pervaporation Dehydration Performance of Chitosan/Polysulfone Composite Hollow-Fiber Membranes

2008.03 Journal of Membrane Science, 311(1-2), 243-250 (2008)

Preparation of poly(vinylidene fluoride) microfiltration membrane with uniform surface-copolymerized poly(ethylene glycol) methacrylate and improvement of blood compatibility

2008.02 Journal of Membrane Science, 309(1-2), 165-174 (2008)

Predicting effect of interparticle interactions on permeate flux decline in CMF of colloidal suspensions: An overlapped type of local neural network

2008.02 Journal of Membrane Science, 308(1-2), 54-65 (2008)

Batch-to-batch iterative learning control and within-batch on-line control for end-point qualities using MPLS-based dEWMA        

2008.02 Chemical Engineering Science, 63(4), 977-990 (2008)

Compression and deformation of soft spherical particles

2008.01 Chemical Engineering Science, 63(1), 195-203 (2008)

Nanoparticles in wastewater from a science-based industrial park—Coagulation using polyaluminum chloride

2007.12 Journal of Environmental Management, 85(4), 1009–1014 (2007)

Surface modification of perfluorosulfonic acid membranes with perfluoroheptane (C₇F₁₆)/argon plasma

2007.11 Journal of Membrane Science, 305(1-2), 226–237 (2007)

Pervaporation Separation of Water/Ethanol Mixture by Poly(phenylene oxide) and Sulfonated Poly(phenylene oxide) Membranes

2007.10 Journal of Applied Polymer Science, 106(2), 1412–1420 (2007)

Fibronectin and Culture Temperature Modulate the Efficacy of an Avidin–Biotin Binding System for Chondrocyte Adhesion and Growth on Biodegradable Polymers

2007.10  Biotechnology and Bioengineering, 98(2), 498-507 (2007)

Surface Grafting of Polyimide onto Silicon Surface: Preparation and Characterization  

2007.09  Journal of Polymer Science: Part A: Polymer Chemistry 45(17), 4161–4167 (2007)

Preparation and Cell Compatibility Evaluation of Chitosan/Collagen Composite Scaffolds Using Amino Acids as Crosslinking Bridges

2007.08 Journal of Applied Polymer Science, 105 (4), 1774-1785 (2007)

Pervaporation Separation of Water/Ethanol Mixture by Poly(phenylene oxide) and Sulfonated Poly(phenylene oxide) Membranes         

2007.08 Journal of Applied Polymer Science, 105(3), 1566–1574 (2007)

Preparation and Cell Compatibility Evaluation of Chitosan/Collagen Composite Scaffolds Using Amino Acids as Crosslinking Bridges 

2007.08 Journal of Applied Polymer Science, 105 (4), 1774-1785

Synthesis and Characterization of Novel Thermally Stable and Optically Active Poly(amide-imide)s Derived from N,N'-(4,4'-Diphthaloyl)-bis-L-leucine Diacid and Aromatic Diamines

2007.06 Journal of Applied Polymer Science, 104(5), 3096–3102

Polyhedral oligomeric silsequioxane monolayer as a nanoporous interlayer for preparation of low-k dielectric films

2007.06 Nanotechnology, 18(22), 225701

Proton exchange membranes modified with sulfonated silica nanoparticles for direct methanol fuel cells

2007.06 Journal of Membrane Science, 296(1-2), 21-28

Surface Modification and Adhesion Improvement of Expanded Poly(tetrafluoroethylene) Films by Plasma Graft Polymerization 

2006.09 Surf. Coat. Tech., 201 (1-2), 63-72

Morphology Control of Polysulfone Hollow Fiber Membranes via Water Vapor Induced Phase Separation

2006.07 J. Membr. Sci., 278 (1-2), 390-400

2006.04 J. Membr. Sci., 274 (1-2), 47-55

2006.01 Eur. Polym. J., 24 (1), 140-148

Sulfonated poly(phthalazinone ether ketone) for proton exchange membranes in direct methanol fuel cells

2005.11 J. Membr. Sci. 265(1-2),108-114

2005.06  International J. Heat and Mass Transfer, 48(12), 2483-2492

2005.07  Eur. Polym. J., 41(7), 1667-1673

2005.06  J. Membr. Sci., 255 (1-2), 33-47

Preparation and characterization of RGD-immobilized chitosan scaffolds

2005.06  Biomaterials, 26(16), 3197-3206

2005.05  J. Membr. Sci., 253(1-2), 191-198

Crosslinked organic–inorganic hybrid chitosan membranes for pervaporation dehydration of isopropanol–water mixtures with a long-term stability 

2005.04  J. Membr. Sci., 251(1-2), 233-238

Fe (III) supported on resin as effective catalyst for the heterogeneous oxidation of phenol in aqueous solution

2005.03 Chemosphere., 59 (1), 117-125 (2005)

Sorption and transport properties of gases in aromatic polyimide membranes

2005.02 J. Membr. Sci., 248 (1-2), 15-25

Chitosan-silica complex membranes from sulfonic acid functionalized silica nanoparticles for pervaporation dehydration of ethanol-water solutions

2005.01 Biomacromolecules., 6 (1), 368- 373

Pervaporation separation of aqueous alcohol solution through a carbazole-functionalized norbornene derivative membrane using living ring-opening metathesis polymerization

2005.01 J. Membr. Sci.246(1), 59-65

 Adress：493, Sin Chung Pei Rd., 

              Chung Li, Taiwan 32083,

              R.O.C.

 Email: membrane@cycu.edu.tw